Messages

Every message the tools print, in English, as the code writes it, with <n> for a number, <name> for a name or a text and <x> for a value. What the common ones mean and how to get past them is in Messages.

cmmcomp (C±)

Errors

  • Syntax error on line . You’re a confused soul!

  • Error: yo, where’s the main() function?

  • Error: couldn’t open the file ‘’ for the life of me!!

  • Error on line : the symbol ‘i’ is reserved for the imaginary part of a complex constant. Hands off!

  • Error on line : that name is way too long, characters tops.

  • Error on line : #NUGAIN is not a power of two. norm(x) is x / NUGAIN in hardware: a power of two becomes a shift; anything else becomes a divider, the critical path of the whole ALU.

  • Error on line : #NUBITS is out of range. A SAPHO word has 2 to 32 bits.

  • Error on line : #FFTSIZ is out of range. v[k) reverses 1 to 30 low bits of the index.

  • Error on line : #FROUND only takes 0 (legacy), 1 (truncation + saturation) or 2 (round to nearest even).

  • Error on line : the biggest integer this thing can hold is !

  • Error on line : ‘’ starts with 0, so it is octal, and octal has no 8 or 9.

  • Error on line : the smallest float this thing can hold is !

  • Error on line : the biggest float this thing can hold is !

  • Error on line : the variable ‘’ already exists. Go grab an Ω³!

  • Error on line : is ‘’ in the assembly, and that name is already . Rename one of them.

  • Error on line : is ‘’ in the assembly, which is an instruction of the processor. Rename it.

  • Error on line : : ‘’ is an instruction of the processor. Rename it.

  • Error on line : a function can’t be called ‘’: .

  • Error on line : ‘’: names starting with ‘__’ belong to the compiler.

  • Error on line : I’d really appreciate it if you declared the variable ‘’.

  • Error on line : c’mon dude, declare the variable ‘’ properly!

  • Error on line : gotta declare ‘’ first!

  • Error on line : where’s the array index for the variable ‘’?

  • Error on line : ‘’ is an array. Where’s the index, dude?

  • Error on line : ‘’ isn’t an array.

  • Error on line : ‘’ ain’t an array, mate!

  • Error: the source scanner stopped:

  • Error on line : an expression nested too deep for the compiler. Split it with intermediate variables.

  • Error on line : case appears twice in this switch.

  • Error on line : this switch already has a default.

  • Error on line : the character ‘’ is not part of C±.

  • Error on line : the index of ‘’ is out of range, 0 to .

  • Error on line : the array ‘’ has elements; it can have 1 to .

  • Error on line : array ‘’ has two dimensions!

  • Error on line : array ‘’ has just one dimension!

  • Error on line : what were you smoking when you tried to increment a complex number?

  • Error on line : that’s not how you use ‘’!

  • Error on line : there’s no input port , dude!

  • Error on line : there’s no output port , dude!

  • Error on line : #PRNAME is gone. The processor takes the name of the file (filtro.cmm becomes the processor filtro): delete the line and, for another name, rename the file.

  • Error on line : the link number is an integer from 0 to , and I found .

  • Error on line : link was already used _sync. A link has one hardware: either the partner is on the same clock (toma_sync/cade_sync/fcade_sync in every use) or it is not (toma/cade/fcade in every use).

  • Error on line : cade() brings one word, and ‘’ is complex (two words). Take the real and the imaginary parts separately.

  • Error on line : first pick which info you want from this complex number!

  • Error on line : using sign(.,.) with complex numbers makes zero sense!

  • Error on line : using the ‘pset(.)’ function with complex numbers makes zero sense!

  • Error on line : nope! norm(.) is integer-only!

  • Error on line : (.) doesn’t take a comp.

  • Error on line : a complex number raised to a power? Dream on! Didn’t build that yet, you’re on your own!

  • Error on line : argument of real(.) has gotta be complex!

  • Error on line : argument of imag(.) has gotta be complex!

  • Error on line : argument of mod2(.) has gotta be complex!

  • Error on line : argument of fase(.) has gotta be complex!

  • Error on line : arguments of complex(.,.) can’t themselves be complex!

  • Error on line : haven’t coded this up for complex numbers yet. You’re on your own!

  • Error on line : ‘’ ain’t even a vector, mate!

  • Error on line : ‘’ ain’t even a matrix, mate!

  • Error on line : you can only shift a vector into itself, mate!

  • Error on line : adding and ? Those shapes don’t fit, mate!

  • Error on line : times ? No way: the columns of the first must match the rows of the second!

  • Error on line : ‘’ is and the expression gives . That won’t fit, pal!

  • Error on line : I wanted a number here and you gave me !

  • Error on line : out() sends a number or a vector, not . Slice it up first!

  • Error on line : this Dirac combo is still in the oven. Hang tight!

  • Error on line : complex numbers have no order, so <, >, <= and >= don’t work with a comp. Compare mod2(z), real(z) or imag(z) instead.

  • Error on line : what’s the point of computing a remainder with non-integer numbers? Get a grip!

  • Error on line : logical operation with a comp (int and float only)!

  • Error on line : bad use of the ‘~’ operator. Gotta pass an int. You tripping?

  • Error on line : how am I supposed to do bitwise ops with a complex number? You tripping?

  • Error on line : how am I supposed to shift bits of a complex number? You tripping?

  • Error on line : using comp to shift bits? You’re a confused soul!

  • Error on line : array ‘’ holds and does not take the value between braces.

  • Error on line : array ‘’ has positions and the list between braces reaches position .

  • Error on line : array ‘’ has one dimension; braces inside the list only mark the rows of a 2D array.

  • Error on line : in array ‘’, inner braces mark the rows of a 2D array: every row between braces, or none, each with up to values.

  • Error on line : a return value in a void function? You tripping!

  • Error in function : some path gets to the end without a return, and then it’d run straight into the next function. Put a return at the end.

  • Error on line : where’s the function return value?

  • Error on line : where’s this function ‘’ supposed to be?

  • Error on line : function ‘’ is where exactly?

  • Error on line : check again how many parameters the function ‘’ actually takes.

  • Error on line : take a look at function ‘’, you’ll see it doesn’t return anything.

  • Error on line : parameter list of function ‘’ doesn’t match the original.

  • Error on line : that break is just hanging out lost!

  • Error on line : a continue outside a loop goes nowhere!

  • Error on line : function ‘’ calls itself (). Recursion doesn’t fly in C±. Really want recursion? Use SAPHO’s C++ compiler.

  • Error on line : there’s already an interrupt going on somewhere else before this one!

  • Error on line : duplicate #TOAQUI marker (only one allowed)

  • Error on line : #WAVE takes a variable, and ‘’ isn’t one

  • Error: option ‘’ needs a value.

  • Error: unknown option ‘’.

  • Error: the file ‘’ names the processor, and ‘’ . Rename the file.

  • Error: where’s the folder? It has to sit next to cmmcomp’s bin/ folder. Install YANC again.

  • Error: missing required option ‘’.

Warnings

  • Heads up on line : the array has positions, but an int index of bits only reaches .

  • Heads up on line : if you don’t want this warning, use ‘fout’.

  • Heads up on line : if you don’t want this warning, use ‘out’.

  • Warning on line : conj of a real number? It’s just itself with a zero imaginary part, but ok!

  • Heads up on line : the second operand of the shift is a float. Now you’re killin’ me!

  • Heads up on line : variable ‘’ is int, but getting a float.

  • Heads up on line : local array ‘’ gets the values between braces only once, when the memory is loaded; from one call to the next it keeps what the function wrote into it (like a C static).

  • Heads up on line : local array ‘’ is initialized from file only once, when the memory is loaded; from one call to the next it keeps what the function wrote into it (like a C static).

  • Heads up on line : variable ‘’ is float, but getting an int.

  • Heads up on line : variable ‘’ is comp, but getting an int.

  • Heads up on line : variable ‘’ is comp, but getting a float.

  • Heads up on line : in this conversion I’m truncating the real part, just so you know!

  • Heads up on line : in this conversion I’m only grabbing the real part, just so you know!

  • Heads up on line : converting float to int on parameter of function ‘’.

  • Heads up on line : converting comp to int on parameter of function ‘’.

  • Heads up on line : converting int to float on parameter of function ‘’.

  • Heads up on line : converting comp to float on parameter of function ‘’.

  • Heads up on line : converting int to comp on parameter of function ‘’.

  • Heads up on line : converting float to comp on parameter of function ‘’.

  • Heads up on line : gonna convert float to int on the return of function ‘’? Code away then!

  • Heads up on line : return is float, but getting an int.

  • Heads up on line : function return is comp, but getting an int.

  • Heads up on line : function return is comp, but getting a float.

  • Heads up on line : case index came out float! Gonna truncate it.

  • Heads up on line : case index came out comp! Gonna truncate the real part.

  • Heads up on line : see how the array index came out a float? Gonna truncate it!

  • Heads up on line : see how the first array index came out a float? Gonna truncate it!

  • Heads up on line : see how the second array index came out a float? Gonna truncate it!

  • Heads up on line : see how the array indices came out floats? Gonna truncate ‘em!

  • Heads up on line : a complex array index? Seriously?! Gonna truncate the real part.

  • Heads up on line : a complex array index? Seriously?! Gonna grab the real part.

  • Heads up on line : these array indices are all over the place. You’re a confused soul!

  • Heads up on line : array index is coming out float. Gonna generate a ton of code to truncate it!

  • Heads up: global variable ‘’ is never read, so it’s out of the program and the waveform (#WAVE keeps it).

  • Heads up: variable ‘’ in function ‘’ is never read, so it’s out of the program and the waveform (#WAVE , in the function, keeps it).

  • Heads up: function ‘’ isn’t being used. Save some memory, will ya!

  • Heads up on line : constant is below the smallest normal float () and becomes 0 at #FROUND . Use #FROUND 0 or raise #NBEXPO.

Information

  • Info on line : ‘’ is read at one spot and written at another, so the result takes a detour through the temporary area ( words).

  • Info on line : the product in the middle of the chain goes to the temporary area ( words), or it’d be computed all over again for every element.

  • Info: the Dirac temporary area (__dirac_tmp) takes words of data memory. To save them: write the result to an array that isn’t on the right-hand side, or compute the middle product into an array of your own, on a line before. Who used it:

  • Info on line : #TOAQUI marker registered (drives the cheguei pin)

  • Info: interruption directive found at line

  • Info: assembly instructions generated

  • Info: constant on line approximated to (error = )

  • Info: adding assembly macro for root square computation

  • Info: adding assembly macro for arc-tangent computation

  • Info: adding assembly macro for sin computation

  • Info: adding assembly macro for tangent computation

  • Info: adding assembly macro for exponential computation

  • Info: adding assembly macro for natural-logarithm computation

  • Info: array initialization with file for variable ‘’ at line

  • Info: Dirac notation for shift register in vector detected at line

Other

  • Internal error of cmmcomp (), on line . Not your program’s fault: tell the maintainers and send the program along.

  • Sweet: it compiled! Now you just gotta figure out why it doesn’t work.

cppcomp (C++)

Errors

  • error: : ‘’ is an instruction of the processor’s assembly, rename it

  • error: is ‘’ in the assembly, which is an instruction of the processor: rename it

  • error: : ‘global’ names the global variables in the simulation log, rename the function

  • error: : ‘’ is reserved, it is ; rename it

  • error: and are both ‘’ in the assembly: rename one of them

  • error: _Generic: no association matches the controlling type

  • error: undefined ‘’

  • error: subscript on non-array/non-pointer

  • error: undefined function ‘’

  • error: deref on non-pointer

  • error: ‘.’ on non-struct

  • error: no such field ‘’

  • error: ‘->’ on non-pointer-to-struct

  • error: expression is not an lvalue

  • error: no field ‘’

  • error: bad -> target

  • error: (): the link number comes first and is an integer literal from 0 to

  • error: link was already used _sync: a link has one hardware, the partner is on my clock (the _sync forms in every use) or it is not (toma/cade/fcade in every use)

  • error: cade() brings one word: it can only go into a one-word variable

  • error: assignment to const ‘’

  • error: T(args) on non-class type

  • error: method call on non-class value

  • error: no method ‘’ in class ‘’

  • error: in(port) takes 1 arg

  • error: in() port must be a literal int

  • error: out(port,val) takes 2 args

  • error: out() port must be a literal int

  • error: (link, value) takes 2 args

  • error: toma() carries one word: this value takes

  • error: (link) takes 1 arg, the link number

  • error: malloc(nwords) takes 1 arg

  • error: free(ptr) takes 1 arg

  • error: __zerofill takes 2 args

  • error: field designator in array initializer

  • error: array designator in struct initializer

  • error: no field ‘’ in initializer

  • error: too many initializers

  • error: array/struct local in a recursive function is not supported

  • error: break outside of loop/switch

  • error: continue outside of loop

  • error: return value in void function

  • error: case/default outside switch

  • error: cannot open

  • error: program has no main() function

  • error: a lambda is only supported as a global initializer (immediately-invoked, no captures)

  • error: cannot deduce the lambda’s return type (return a local variable or a literal)

  • error: range-for over ‘’: it takes an array or an object with size() and operator[]

  • error: _Static_assert requires a constant integer expression

  • error: static assertion failed

  • error: redefinition of global ‘’ (if this comes from a header, guard it with #ifndef or #pragma once)

  • error: unknown type ‘’

  • error: ‘’ is not a class template

  • error: unknown base class ‘’

  • error: member ‘’ takes one initializer

  • error: array field size must be constant

  • error: array size must be a constant expression

  • error: template argument must be a constant

  • error: typedef cannot have an initializer

  • error: an array of function pointers takes a { … } initializer

  • error: ‘’ redeclared as a function (already a variable)

  • error: redefinition of function ‘’

  • error: out-of-class definition for unknown class ‘’

  • error: qualified id ‘::’ is not a constructor

  • error: out-of-class ctor for unknown class ‘’

  • error: qualified id ‘::~’ is not a destructor

  • error: out-of-class dtor for unknown class ‘’

  • error: ‘’: a name with ‘__’ in it is reserved (C++ keeps them for the compiler, and YANC uses them in the assembly)

  • error: #pragma yanc prname is gone: the processor takes the name of the file (filtro.cpp becomes the processor filtro); delete the line and, for another name, rename the file

  • error: #pragma yanc fftsiz does nothing in C++ (the bit-reversed addressing is C± only); delete the line

  • error: #pragma yanc itradd does nothing in C++ (interrupts are C± only); delete the line

  • error: ‘’: a number starting with 0 is octal, and has no 8 or 9

  • error: unexpected character ‘’ (0x)

  • error: unknown option ‘’

  • error: the file ‘’ names the processor, and ‘’ ; rename the file

  • error: parse failed

  • error: cannot open ‘’ for writing

  • error: include too deep

  • error: cannot open ‘’

  • error: can’t find #include “”

  • error: can’t find #include <>

  • error: #ifdef nesting too deep

  • error: #if nesting too deep

  • error: stray #elif

  • error: stray #else

  • error: stray #endif

  • error: too many -I dirs

  • error: syntax error

  • error: memory exhausted

Warnings

  • warning: out() sends an integer word; this float is output as its raw bit pattern (wrong value) – cast to int, e.g. out(port, (int)x)

  • warning: ‘’ asks for bits, but a YANC word has : the requested size is ignored and ‘’ is a -bit

  • warning: unknown #pragma yanc setting ‘’

asmcomp

Errors

  • Error: out of memory while growing the symbol table!

  • Error: the program has no instruction, so there is no processor to make.

  • Error: where the heck is the file ?

  • Error: couldn’t open the file ‘’ for the life of me!!

  • Error: couldn’t create the file /app_log.txt.

  • Error: the constant ‘’ is not a number.

  • Error: the constant does not fit the processor’s float (NBMANT , NBEXPO ): its exponent is past the maximum.

  • Error: #NUGAIN does not fit a signed -bit word (at most ): norm(x), which is x / NUGAIN, would divide by a negative number. Use a smaller #NUGAIN.

  • Error: #NUGAIN is not a power of two. norm(x) is x / NUGAIN in hardware: a power of two becomes a shift (~12 LUT levels); anything else becomes a constant divider (38 to 70 levels, measured), the critical path of the whole ALU.

  • Error: floating-point setup doesn’t add up. You gotta have NUBITS = NBMANT + NBEXPO + 1 (NUBITS , NBMANT , NBEXPO add up to ). A program without float needs no #NBMANT or #NBEXPO.

  • Error: the exponent is too short for the mantissa (NBMANT , NBEXPO ). You need NBMANT < 2^(NBEXPO-1): with no hidden bit, 1.0 is 2^(NBMANT-1) x 2^-(NBMANT-1), and that exponent has to fit. Widen NBEXPO or narrow NBMANT.

  • Error: #FFTSIZ is out of range. v[k) reverses 1 to 30 low bits of the index.

  • Error: #NUBITS is past 32. A SAPHO word is at most 32 bits.

  • Error: : the operand of LDI/ILI/STI/ISI is an array name or an integer base address.

  • Error: takes words: it must be followed by NOP and the read of its result (expected , found ). The compilers write the sequence; in a hand-written .asm, write it out.

  • Error: the operand of is the link number, an integer from 0 to (found ‘’).

  • Error: #LKSYNC , but the program has no TOM or CAD on link .

  • Error: the program ends inside the sequence of (NOPs and are missing).

  • Error: #FROUND only takes 0 (legacy), 1 (truncation + saturation) or 2 (round to nearest even).

  • Error: line of file ‘’ is empty! Kinda hard to work with that.

  • Error: line of file ‘’ isn’t a valid integer!

  • Error: line of file ‘’ busts the upper limit of !

  • Error: line of file ‘’ is below the lower limit of !

  • Error: line of file ‘’ isn’t a valid float!

  • Error: line of file ‘’ busts the upper limit of !

  • Error: line of file ‘’ is below the lower limit of !

  • Error: line of file ‘’ isn’t a valid comp!

  • Error: real part of line of file ‘’ busts the upper limit of !

  • Error: real part of line of file ‘’ is below the lower limit of !

  • Error: imaginary part of line of file ‘’ busts the upper limit of !

  • Error: imaginary part of line of file ‘’ is below the lower limit of !

  • Error: you’re lines short in file ‘’!

  • Error: array ‘’ has positions and initial values!

  • Error: value of array ‘’ () does not fit a -bit word!

  • Error: option ‘’ needs a value.

  • Error: unknown option ‘’.

  • Error: the file ‘’ names the processor, and ‘’ . Rename the file.

  • Error: the folder is not next to asmcomp’s bin/ folder. Install YANC again.

  • Error: missing required option ‘’.

  • Error: option ‘’ expects a non-negative integer, got ‘’.

Warnings

  • Heads up: there’s extra lines hanging around in file ‘’!

  • Heads up: input port isn’t being used. Burning hardware for nothing!

  • Heads up: output port isn’t being used. Burning hardware for nothing!

Information

  • Info: implementing interruption handling

  • Info: instructions and variables were found

  • Info: stack depths from the program: SDEPTH , NDSTAC

  • Info: filling array with values read from file

  • Info: largest approximation error in file ‘’ is on line

  • Info: largest approximation error, for real part, in file ‘’, is on line

  • Info: largest approximation error, for imaginary part, in file ‘’, is on line

  • Info: largest approximation error in the values of array ‘’ is on value

  • Info: using % of the Assembly Instruction Set

  • Info: using % of the ULA operations

  • Info: adding array handling

  • Info: adding bit-reverse array index (FFT)

  • Info: adding data input handling

  • Info: adding data output handling

  • Info: adding toma (TOM), which hands a value to the partner processor

  • Info: adding cade (CAD), which takes a value from the partner processor

  • Info: adding stack memory for function calls

  • Info: ULA resource -> int to float converter

  • Info: ULA resource -> float to int converter

  • Info: ULA resource -> integer adder

  • Info: ULA resource -> float-point adder

  • Info: ULA resource -> integer multiplier

  • Info: ULA resource -> float-point multiplier

  • Info: ULA resource -> integer divider (not recomended for high frequency opperation)

  • Info: ULA resource -> float-point divider (not recomended for high frequency opperation)

  • Info: ULA resource -> modulo computation (not recomended for high frequency opperation)

  • Info: ULA resource -> integer sign computation (standard library)

  • Info: ULA resource -> float-point sign computation (standard library)

  • Info: ULA resource -> integer negative operation

  • Info: ULA resource -> float-point negative operation

  • Info: ULA resource -> integer absolute operation

  • Info: ULA resource -> float-point absolute operation

  • Info: ULA resource -> integer pset computation (standard library)

  • Info: ULA resource -> float-point pset computation (standard library)

  • Info: ULA resource -> normalization computation (standard library)

  • Info: ULA resource -> & operator

  • Info: ULA resource -> | operator

  • Info: ULA resource -> ^ operator

  • Info: ULA resource -> ~ operator

  • Info: ULA resource -> && operator

  • Info: ULA resource -> || operator

  • Info: ULA resource -> ! operator

  • Info: ULA resource -> < operator for int

  • Info: ULA resource -> < operator for float

  • Info: ULA resource -> > operator for int

  • Info: ULA resource -> > operator for float

  • Info: ULA resource -> == operator

  • Info: ULA resource -> << operator

  • Info: ULA resource -> >> operator

  • Info: ULA resource -> >>> operator

  • Info: ULA resource -> root-square approximation for float

  • Info: ULA resource -> float scale by a power of two (2^k)

  • Info: ULA resource -> base-2 exponent extraction of float

Other

  • Bad format!

  • Sweet: the processor is good to go.